Improved productivity, neater and better case sealing, plus the ability to relocate, adapt and extend the packing station.
These are some of the benefits of investing in a flexible SOCO SYSTEM packing station.
Stainless steel for wet environments
The SOCO SYSTEM product range is available in galvanised or stainless steel.
Fill, seal and palletise from the same position
The packing station with boomerang allows three operations to be carried out within a very limited area, approx. 86 ft²:
The packing station with boomerang features the following:
The entire system can be adjusted to the correct working height and with a decline to the accumulating conveyor.
The system consists of standard modules that can be reassembled for other solutions. The need for increased mobility is met using braked castors mounted directly on the legs.
Accumulation frees the operator for other tasks
The rotary table is used for accumulation of individual products. The table frees the operator for other tasks without the need for a break in production.
The products rotate on the rotary table and remain within the operator’s reach at all times to achieve efficient working methods and an ergonomically correct working position.
Flexi conveyors can be turned and extended to the desired position. The length can be varied from 59 7/8" to 210 5/8".
The height-adjustable legs are available with plastic feet as illustrated, with a baseplate for floor mounting or with brake castors for quick relocation.
SOCO SYSTEM braked castors are of strong construction and can be braked effectively in the direction of movement or rotation.
Castors are a standard feature of the rotary table.
SOCO SYSTEM tape dispensers have been developed through many years of user experience to become the optimum tool they are today.
Setting a new case size is quick and easy.
The model T-55 is for packing stations that handle many different sizes of case.
The roller conveyor in front of the machine is equipped with a case holder and functions like a packing table.
The F-100 is mounted on the case sealer and is also available in a version that pushes the filled case into the case sealer (F-100-P).
The case is unfolded.
The front flap and end flap are folded towards the rail.
The case is lowered onto the rail and pulled backwards, and the side flaps are closed.
The case is held in place and is then ready for filling.
For easier insertion of cases. The operator folds the rear flap while feeding the case into the machine.
(Suitable for model T-10.)