Drive section for driven roller conveyors - drive in the right side

With Ø 1 7/8" plastic rollers.

The conveyors are used, for instance, where conveyors operate at right angles or where items are pushed from one conveyor to another.

Examples of ordering
Choose a drive section in the table. Please note that for total lengths exceeding 13 ft, the drive section must always be 6.7 ft long.

Then choose a coupled section of a length which together with the drive section provides the desired total length.

Example 1:
4 ft driven roller conveyor with 2 3/8" pitch and, 15 3/4"  width.
1 off item no.: 450780743.

Example 2:
9 ft driven roller conveyor with pitch 2 3/8", width 15 3/4".
1 off item no.: 450780744.
1 off item no.: 450781742.

Example 3:
20 ft driven roller conveyor with pitch 2 3/8", width 15 3/4".
1 off item no.: 450782744.
2 off item no.: 450781744.

  • The conveyors are silent with smooth frames and no sharp edges.
  • Minimum danger of injury - the drive axle is sealed off.
  • Item no.
  • Specifications
  • Accessories
  • Related products
  • Width Length* Gear ft/min. Under 13 ft Axle pitch 2 3/8"/ Item no. Quantity Under 13 ft Axle pitch 3 1/2"/ Item no. Quantity Over 13 ft Axle pitch 2 3/8"/ Item no. Quantity Over 13 ft Axle pitch 3 1/2"/ Item no. Quantity
    11 3/4" 19 3/4" 33 450780731 450783731
    19 3/4" 65.6 450790731 450793731
    29 1/2" 33 450780735 450783735
    29 1/2" 65.6 450790735 450793735
    39 3/8" 33 450780732 450783732
    39 3/8" 65.6 450790732 450793732
    59" 33 450780733 450783733
    59" 65.6 450790733 450793733
    78 3/4" 33 450780734 450783734 450782734 450785734
    78 3/4" 65.6 450790734 450793734 450792734 450795734
    98 3/8" 33 450780736 450783736 450782736 450785736
    98 3/8" 65.6 450790736 450793736 450792736 450795736
    118 1/8" 33 450780737 450783737 450782737 450785737
    118 1/8" 65.6 450790737 450793737 450792737 450795737
    15 3/4" 19 3/4" 33 450780741 450783741
    19 3/4" 65.6 450790741 450793741
    29 1/2" 33 450780745 450783745
    29 1/2" 65.6 450790745 450793745
    39 3/8" 33 450780742 450783742
    39 3/8" 65.6 450790742 450793742
    59" 33 450780743 450783743
    59" 65.6 450790743 450793743
    78 3/4" 33 450780744 450783744 450782744 450785744
    78 3/4" 65.6 450790744 450793744 450792744 450795744
    98 3/8" 33 450780746 450783746 450782746 450785746
    98 3/8" 65.6 450790746 450793746 450792746 450795746
    118 1/8" 33 450780747 450783747 450782747 450785747
    118 1/8" 65.6 450790747 450793747 450792747 450795747
    19 3/4" 19 3/4" 33 450780751 450783751
    19 3/4" 65.6 450790751 450793751
    29 1/2" 33 450780755 450783755
    29 1/2" 65.6 450790755 450793755
    39 3/8" 33 450780752 450783752
    39 3/8" 65.6 450790752 450793752
    59" 33 450780753 450783753
    59" 65.6 450790753 450793753
    78 3/4" 33 450780754 450783754 450782754 450785754
    78 3/4" 65.6 450790754 450793754 450792754 450795754
    98 3/8" 33 450780756 450783756 450782756 450785756
    98 3/8" 65.6 450790756 450793756 450792756 450795756
    118 1/8" 33 450780757 450783757 450782757 450785757
    118 1/8" 65.6 450790757 450793757 450792757 450795757
    23 5/8" 19 3/4" 33 450780761 450783761
    19 3/4" 65.6 450790761 450793761
    29 1/2" 33 450780765 450783765
    29 1/2" 65.6 450790765 450793765
    39 3/8" 33 450780762 450783762
    39 3/8" 65.6 450790762 450793762
    59" 33 450780763 450783763
    59" 65.6 450790763 450793763
    78 3/4" 33 450780764 450783764 450782764 450785764
    78 3/4" 65.6 450790764 450793764 450792764 450795764
    98 3/8" 33 450780766 450783766 450782766 450785766
    98 3/8" 65.6 450790766 450793766 450792766 450795766
    118 1/8" 33 450780767 450783767 450782767 450785767
    118 1/8" 65.6 450790767 450793767 450792767 450795767
    *Please note that for total lengths exceeding 13 ft, the drive section must always be 6.7 ft long. All measurements are in inches. Subject to alteration.
  • Specifications
    Tubes Ø 1 7/8" impact-proof plastic.
    Axles Ø 1/4" aluminium.
    End bearings Plastic insert with stainless steel balls.
    Frames Electro-galvanised steel.
    Axle pitch 2 3/8" or 3 1/2".
    Width 11 3/4", 15 3/4", 19 3/4", 23 5/8".
    Length 19 3/4", 29 1/2", 39 3/8", 59", 78 3/4", 98 3/8", 118 1/8".
    Load 22 lbs per roller or max. 165 lbs per metre conveyor.
    Drive unit 0.10 kW or 0.37 kW.
    Gear 20:1 = 33 ft/min. or 20:1 = 65.6 ft/min. A frequency control system can be connected directly to the 3-phase motor.
    Drive With polycord belts from coupled axle to each roller.
    Total length Max. 33-39 ft depending on the load.
    All measurements are in inches. Subject to alteration.