Coupled sections for driven pallet roller conveyors

For support or floor mounting.

  • Item no.
  • Specifications
  • Width Length Rp 89*
    Item no.
    Quantity Rp 178*
    Item no.
    Quantity
    970 250 485911020
    500 485911120
    750 485911220
    1000 480711120 480721120
    1500 480711220 480721220
    2000 480711320 480721320
    1170 250 485912020
    500 485912120
    750 485912220
    1000 480712120 480722120
    1500 480712220 480722220
    2000 480712320 480722320
    1370 250 485913020
    500 485913120
    750 485913220
    1000 480713120 480723120
    1500 480713220 480723220
    2000 480713320 480723320
    *Distance between the roller centres. n/a.: not available. All measurements are in mm. Subject to alteration.
  • Specifications
    Surface treatment Electro galvanized steel with the exception of chains and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 80 mm electro galvanized steel tubes.
    Axle diameter Ø 17 mm.
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 1.500 kg load (max 1.000 kg for RP=178) per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Standard height The total height from floor to top of rollers is 190 mm.
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Subject to alteration.