Back
  1. Homepage
  2. Pallet handling
  3. Pallet roller conveyors 190
  4. Driven pallet roller conveyors with side-mounted gear motor and cover plates
Driven pallet roller conveyors with side-mounted gear motor and cover plates
Zoom

Driven pallet roller conveyors with side-mounted gear motor and cover plates

For support or floor mounting.

The maximum length of a roller conveyor with one gear motor is 15 ft with a maximum payload of 3307 lbs.

The conveyors can be mounted directly on the floor without supports.

All sections are supplied with coupling fittings.

  • Silent - minimal friction.
  • Smooth design - no sharp edges.
  • Easy to relocate and extend.

The cover plates prevent you from getting caught between the rollers.

  • Item no.
  • Specifications
  • Add to wishlist
    Width Length Rp 7"*
    Item no.     		Quantity
    38 1/4" 39 3/8" 480721641
    59" 480721741
    78 3/4" 480721841
    46" 39 3/8" 480722641
    59" 480722741
    78 3/4" 480722841
    54" 39 3/8" 480723641
    59" 480723741
    78 3/4" 480723841
    *Distance between the roller centres. All measurements are in inches. Subject to alteration.
    Add to wishlist
  • Specifications
    Surface treatment Electro galvanized steel with the exception of gear motor, chains, and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 3 1/8" electro galvanized steel tubes.
    Axle diameter Ø 5/8".
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 2205 lbs load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Standard height The total height from floor to top of rollers is 7 1/2".
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Gear motor 0.37 kW. Hollow shaft worm reduction gear sidemounted on conveyor frame.
    Speed 37 ft/min (other speeds available).
    Subject to alteration.