Back
  1. Homepage
  2. Pallet handling
  3. Pallet roller conveyors height 190
  4. Driven pallet roller conveyors with side-mounted gear motor and cover plates
Driven pallet roller conveyors with side-mounted gear motor and cover plates
Zoom

Driven pallet roller conveyors with side-mounted gear motor and cover plates

For support or floor mounting.

The maximum length of a roller conveyor with one gear motor is 4.5 m with a maximum payload of 1000 kg.

The conveyors can be mounted directly on the floor without supports.

All sections are supplied with coupling fittings.

  • Silent - minimal friction.
  • Smooth design - no sharp edges.
  • Easy to relocate and extend.

The cover plates prevent you from getting caught between the rollers.

  • Item no.
  • Specifications
  • Add to wishlist
    Width Length Rp 178*
    Item no.     		Quantity
    970 1000 480721641
    1500 480721741
    2000 480721841
    1170 1000 480722641
    1500 480722741
    2000 480722841
    1370 1000 480723641
    1500 480723741
    2000 480723841
    *Distance between the roller centres. All measurements are in mm. Subject to alteration.
    Add to wishlist
  • Specifications
    Surface treatment Electro galvanized steel with the exception of gear motor, chains, and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 80 mm electro galvanized steel tubes.
    Axle diameter Ø 17 mm.
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 1,000 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Standard height The total height from floor to top of rollers is 190 mm.
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Gear motor 0.37 kW. Hollow shaft worm reduction gear sidemounted on conveyor frame.
    Speed 11.4 m/min (other speeds available).
    Subject to alteration.