Coupled sections for driven pallet conveyors

For floor mounting.

  • Item no.
  • Specifications
  • Width Length Rp 89*
    Item No.
    Quantity Rp 178*
    Item No.
    Quantity
    970 250 485911030
    500 485911130
    750 485911230
    1000 480711130 480721130
    1500 480711230 480721230
    2000 480711330 480721330
    1170 250 485912030
    500 485912130
    750 485912230
    1000 480712130 480722130
    1500 480712230 480722230
    2000 480712330 480722330
    1370 250 485913030
    500 485913130
    750 485913230
    1000 480713130 480723130
    1500 480713230 480723230
    2000 480713330 480723330
    *Distance between the roller centres. n/a.: not available. All measurements are in mm. Subject to alteration.
  • Specifications
    Surface treatment Electro galvanized steel with the exception of chain and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 80 mm electro galvanized steel tubes.
    Axle diameter Ø 17 mm.
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 1.500 kg load (max 1.000 kg for RP=178) per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Standard height The total height from floor to top of rollers is 90 mm.
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. ½" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Subject to alteration.