Back
  1. Homepage
  2. Pallet handling
  3. Pallet roller conveyors 190
  4. Coupled sections with cover plates for driven pallet roller conveyors
Coupled sections with cover plates for driven pallet roller conveyors
Zoom

Coupled sections with cover plates for driven pallet roller conveyors

For support or floor mounting.

The cover plates prevent you from getting caught between the rollers.

  • Item no.
  • Specifications
  • Add to wishlist
    Width Length Rp 7"*
    Item no.     		Quantity
    38 1/4" 39 3/8" 480721620
    59" 480721720
    78 3/4" 480721820
    46" 39 3/8" 480722620
    59" 480722720
    78 3/4" 480722820
    54" 39 3/8" 480723620
    59" 480723720
    78 3/4" 480723820
    *Distance between the roller centres. All measurements are in inches. Subject to alteration.
    Add to wishlist
  • Specifications
    Surface treatment Electro galvanized steel with the exception of chains and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 3 1/8" electro galvanized steel tubes.
    Axle diameter Ø 5/8".
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 2205 lbs load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Standard height The total height from floor to top of rollers is 7 1/2".
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Subject to alteration.