Coupled sections with cover plates for driven pallet roller conveyors

For support or floor mounting.

The cover plates prevent you from getting caught between the rollers.

  • Item no.
  • Specifications
  • Width Length Rp 178*
    Item no.
    Quantity
    970 1000 480721620
    1500 480721720
    2000 480721820
    1170 1000 480722620
    1500 480722720
    2000 480722820
    1370 1000 480723620
    1500 480723720
    2000 480723820
    *Distance between the roller centres. All measurements are in mm. Subject to alteration.
  • Specifications
    Surface treatment Electro galvanized steel with the exception of chains and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 80 mm electro galvanized steel tubes.
    Axle diameter Ø 17 mm.
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 1,000 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Standard height The total height from floor to top of rollers is 190 mm.
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Subject to alteration.