Driven pallet roller conveyors with side-mounted gear motor
For support or floor mounting.
The maximum length of a roller conveyor with one gear motor is 15 ft with a maximum payload of 3307 lbs.
The conveyors can be mounted directly on the floor without supports.
All sections are supplied with coupling fittings.
| Width | Length |
Rp 3 1/2"* Item no. |
Quantity |
Rp 7"* Item no. |
Quantity |
|---|---|---|---|---|---|
| 38 1/4" | 19 3/4" | 485911141 | |||
| 29 1/2" | 485911241 | ||||
| 39 3/8" | 480711141 | 480721141 | |||
| 59" | 480711241 | 480721241 | |||
| 78 3/4" | 480711341 | 480721341 | |||
| 46" | 19 3/4" | 485912141 | |||
| 29 1/2" | 485912241 | ||||
| 39 3/8" | 480712141 | 480722141 | |||
| 59" | 480712241 | 480722241 | |||
| 78 3/4" | 480712341 | 480722341 | |||
| 54" | 19 3/4" | 485913141 | |||
| 29 1/2" | 485913241 | ||||
| 39 3/8" | 480713141 | 480723141 | |||
| 59" | 480713241 | 480723241 | |||
| 78 3/4" | 480713341 | 480723341 |
| Specifications | |
|---|---|
| Surface treatment | Electro galvanized steel with the exception of gear motor, chains, and roller axles. Rollers are electro galvanized with yellow crome. |
| Frames | Cold-bend angle profiles bolted to C-profile cross bars with supports. |
| Rollers | Ø 3 1/8" electro galvanized steel tubes. |
| Axle diameter | Ø 5/8". |
| Bearings | 6203 - 2rs. |
| Roller fittings | Rollers are suspended between side frames by means of M10 axle. |
| Payload | For use up to 3307 lbs load (max 2205 lbs for RP=178) per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM. |
| Standard height | The total height from floor to top of rollers is 7 1/2". |
| Chain drive | Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller. |
| Chain cover | Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor. |
| Gear motor | 0.37 kW. Hollow shaft worm reduction gear sidemounted on conveyor frame. |
| Speed | 37 ft/min (other speeds available). |
| All measurements are in inches. Subject to alteration. | |
Supports for external mounting offer high durability and stability and are also recommended for heavy-duty purposes.
Different models make it possible to achieve the desired operational height.
Supports for internal mounting are recommended where space does not allow external mounting.
Supports for internal mounting are not recommended for heights exceeding 13 3/4".
