Supports for driven curves
Used for SOCO SYSTEM driven curves for direct mounting on the frames.
Call for price
Curves with conical rollers 30°
With two drives for high loadings.
The curves are available with guide profiles on both the inside- and the outside.
Low guide profile = H1.
High guide profile = H2.
| Width | Gear ft/min. | H1 inside + H1 outside/ Item no. | Quantity | H1 inside + H2 outside/ Item no. | Quantity | H2 inside + H2 outside/ Item no. | Quantity |
|---|---|---|---|---|---|---|---|
| 11 3/4" | 10 | 451167305 | 451167325 | 451167315 | |||
| 20 | 451177305 | 451177325 | 451177315 | ||||
| 15 3/4" | 10 | 451167405 | 451167425 | 451167415 | |||
| 20 | 451177405 | 451177425 | 451177415 | ||||
| 19 3/4" | 10 | 451167505 | 451167525 | 451167515 | |||
| 20 | 451177505 | 451177525 | 451177515 | ||||
| 23 5/8" | 10 | 451167605 | 451167625 | 451167615 | |||
| 20 | 451177605 | 451177625 | 451177615 |
| Specifications | |
|---|---|
| Tubes | Impact-proof plastic. |
| Axles | Ø 3/8". |
| Frames | Electro-galvanised steel. |
| Axle pitch | 6°. |
| Width | 11 3/4", 15 3/4", 19 3/4", 23 5/8". |
| Gear | 20:1 = 33 ft/min. or 10:1 = 65.6 ft/min. A frequency control system can be connected direct to the 3-phase motor. |
| Drive | With polycord belts. |
| All measurements are in inches. Subject to alteration. | |