Driven pallet roller conveyors with sub-mounted gear motor

For support mounting only.

  • Item no.
  • Specifications
  • Related products
  • Minimum height 255 mm excl. supports.
    Width Length Rp 89*
    Item no.
    Quantity Rp 178*
    Item no.
    Quantity
    970 500 485911121
    750 485911221
    1000 480711121 480721121
    1500 480711221 480721221
    2000 480711321 480721321
    1170 500 485912121
    750 485912221
    1000 480712121 480722121
    1500 480712221 480722221
    2000 480712321 480722321
    1370 500 485913121
    750 485913221
    1000 480713121 480723121
    1500 480713221 480723221
    2000 480713321 480723321
    *Distance between the roller centres. All measurements are in mm. Subject to alteration.
  • Specifications
    Surface treatment Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome.
    Frames Cold-bend angle profiles bolted to C-profile cross bars with supports.
    Rollers Ø 80 mm electro galvanized steel tubes.
    Axle diameter Ø 17 mm.
    Bearings 6203 - 2rs.
    Roller fittings Rollers are suspended between side frames by means of M10 axle.
    Payload For use up to 1,500 kg load (max 1,000 kg for RP=178) per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
    Chain drive Chains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
    Chain cover Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
    Gear motor 0.37 kW. Hollow shaft worm reduction gear sidemounted on conveyor frame.
    Speed 11.4 m/min (other speeds available).
    Subject to alteration.