Drive section for driven roller conveyors - drive in the left side

With Ø 48 plastic rollers.

The conveyors are used, for instance, where conveyors operate at right angles or where items are pushed from one conveyor to another.

Examples of ordering
Choose a drive section in the table. Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long.

Then choose a coupled section of a length which together with the drive section provides the desired total length.

Example 1:
1.5 m driven roller conveyor with 60 mm pitch and, 400 mm width.
1 off item no.: 450760743.

Example 2:
3 m driven roller conveyor with pitch 60 mm, width 400 mm.
1 off item no.: 450760744.
1 off item no.: 450761742.

Example 3:
6 m driven roller conveyor with pitch 60 mm, width 400 mm.
1 off item no.: 450762744.
2 off item no.: 450761744.

  • The conveyors are silent with smooth frames and no sharp edges.
  • Minimum danger of injury - the drive axle is sealed off.
  • Item no.
  • Specifications
  • Accessories
  • Width Length* Gear m/min. Under 4 m Axle pitch 60/item no. Quantity Under 4 m Axle pitch 90/item no. Quantity Over 4 m Axle pitch 60/item no. Quantity Over 4 m Axle pitch 90/item no. Quantity
    300 500 10 450760731 450763731
    500 20 450770731 450773731
    750 10 450760735 450763735
    750 20 450770735 450773735
    1000 10 450760732 450763732
    1000 20 450770732 450773732
    1500 10 450760733 450763733
    1500 20 450770733 450773733
    2000 10 450760734 450763734 450762734 450765734
    2000 20 450770734 450773734 450772734 450775734
    2500 10 450760736 450763736
    2500 20 450773736
    3000 10 450760737 450763737
    3000 20 450772737
    400 500 10 450760741 450763741
    500 20 450770741 450773741
    750 10 450760745 450763745
    750 20 450770745 450773745
    1000 10 450760742 450763742
    1000 20 450770742 450773742
    1500 10 450760743 450763743
    1500 20 450770743 450773743
    2000 10 450760744 450763744 450762744 450765744
    2000 20 450770744 450773744 450772744 450775744
    2500 10. 450760746 450763746 450765746
    2500 20 450770746 450772746 450775746
    3000 10 450760747 450763747
    3000 20 450770747 450775747
    500 500 10 450760751 450763751
    500 20 450770751 450773751
    750 10 450760755 450763755
    750 20 450770755 450773755
    1000 10 450760752 450763752
    1000 20 450770752 450773752
    1500 10 450760753 450763753
    1500 20 450770753 450773753
    2000 10 450760754 450763754 450762754 450765754
    2000 20 450770754 450773754 450772754 450775754
    2500 10 450760756 450763756 450765756
    2500 20 450770756 450773756 450775756
    3000 10 450760757 450763757
    3000 20 450770757 450773757 450772757
    600 500 10 450760761 450763761
    500 20 450770761 450773761
    750 10 450760765 450763765
    750 20 450770765 450773765
    1000 10 450760762 450763762
    1000 20 450770762 450773762
    1500 10 450760763 450763763
    1500 20 450770763 450773763
    2000 10 450760764 450763764 450762764 450765764
    2000 20 450770764 450773764 450772764 450775764
    2500 10 450760766 450763766 450765766
    2500 20 450770766 450773766 450772766 450775766
    3000 10 450760767 450763767 450765767
    3000 20 450770767 450773767 450772767 450775767
    *Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. All measurements are in mm. Subject to alteration.
  • Specifications
    Tubes Ø 48 mm impact-proof plastic.
    Axles Ø 8 mm aluminium.
    End bearings Plastic insert with stainless steel balls.
    Drive unit 0.10 kW or 0.37 kW.
    Gear 20:1 = 10 m/min. or 10:1 = 20 m/min. A frequency control system can be connected directly to the 3-phase motor.
    Drive With polycord belts from coupled axle to each roller.
    Frames Electro-galvanised steel.
    Axle pitch 60 or 90 mm.
    Width 300, 400, 500, 600 mm.
    Length 500, 750, 1000, 1500, 2000, 2500, 3000 mm.
    Total length Max. 10-12 m depending on the load.
    Load 10 kg per roller or max. 75 kg per metre conveyor.
    Subject to alteration.