Drive section for driven roller conveyors

With Ø 48 plastic rollers.

The conveyors are used, for instance, where conveyors operate at right angles or where items are pushed from one conveyor to another.

Examples of ordering
Choose a drive section in the table. Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long.

Then choose a coupled section of a length which together with the drive section provides the desired total length.

Example 1:
1.5 m driven roller conveyor with 60 mm pitch and, 400 mm width.
1-off item no.: 450760743.

Example 2:
3 m driven roller conveyor with pitch 60 mm, width 400 mm.
1 off item no.: 450760744.
1 off item no.: 450761742.

Example 3:
6 m driven roller conveyor with pitch 60 mm, width 400 mm.
1 off item no.: 450762744.
1 off item no.: 450761744.

  • The conveyors are silent with smooth frames and no sharp edges.
  • Minimum danger of injury - the drive axle is sealed off.
  • Item no.
  • Specifications
  • Accessories
  • Width Length* Under 4 m Axle pitch 60/item no. Quantity Under 4 m Axle pitch 90/item no. Quantity Over 4 m Axle pitch 60/item no. Quantity Over 4 m Axle pitch 90/item no. Quantity
    300 500 450760731 450763731
    750 450760735 450763735
    1000 450760732 450763732
    1500 450760733 450763733
    2000 450760734 450763734 450762734 450765734
    2500 450760736 450763736
    3000 450760737 450763737
    400 500 450760741 450763741
    750 450760745 450763745
    1000 450760742 450763742
    1500 450760743 450763743
    2000 450760744 450763744 450762744 450765744
    2500 450760746 450763746
    3000 450760747 450763747
    500 500 450760751 450763751
    750 450760755 450763755
    1000 450760752 450763752
    1500 450760753 450763753
    2000 450760754 450763754 450762754 450765754
    2500 450760756 450763756
    3000 450760757 450763757
    600 500 450760761 450763761
    750 450760765 450763765
    1000 450760762 450763762
    1500 450760763 450763763
    2000 450760764 450763764 450762764 450765764
    2500 450760766 450763766
    3000 450760767 450763767
    *Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. All measurements are in mm. Subject to alteration.
  • Specifications
    Tubes Ø 48 mm impact-proof plastic.
    Axles Ø 8 mm aluminium.
    End bearings Plastic insert with stainless steel balls.
    Drive unit 0.10 kW or 0.37 kW.
    Gear Standard 20:1 = 10 m/min. Other gearings available. A frequency control system can be connected directly to the 3-phase motor.
    Drive With polycord belts from coupled axle to each roller.
    Frames Electro-galvanised steel.
    Axle pitch 60 or 90 mm.
    Width 300, 400, 500, 600 mm.
    Length 500, 750, 1000, 1500, 2000, 2500, 3000 mm.
    Total length Max. 10-12 m depending on the load.
    Load 10 kg per roller or max. 75 kg per metre conveyor.
    Subject to alteration.