Print

Driven pallet roller conveyors with sub-mounted gear motor

Driven pallet roller conveyors with sub-mounted gear motor
Zoom


For support mounting only.




Surface treatmentElectro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome.
FramesCold-bend angle profiles bolted to C-profile cross bars with supports.
RollersØ 80 mm electro galvanized steel tubes.
Axle diameter Ø 17 mm.
Bearings6203 - 2rs.
Roller fittingsRollers are suspended between side frames by means of M10 axle.
PayloadFor use up to 1,500 kg load per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.
Chain driveChains operate beneath roller surface. Chain drive is from roller to roller. 1/2" sprockets of hardened steel are integrated with the bearing of the roller.
Chain coverChains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.
Gear motor0.37 kW. Hollow shaft worm reduction gear sidemounted on conveyor frame.
Speed11.4 m/min (other speeds available).
Subject to alteration.

Subscribe

Get information about new products, special offers, invitations etc
   
Name
Email
Subscribe

Quick Links

Searching

Search